Guide · Businesses · 3 min read · Updated 17 November 2026
How to Prepare Sensitive or High-Value Equipment for Freight
Short answer
To prepare sensitive equipment for freight, follow the manufacturer's transport instructions, lock moving parts, use original or purpose-built packaging or crating, fit shock and tilt indicators, photograph everything and declare the full value. Book an air-ride vehicle with a tail lift and a two-person crew, and confirm access at both ends. Air-ride technical moves cost £350–£900, with secure dedicated vehicles from £450.
Why preparation matters
Laboratory instruments, servers, medical devices, precision machinery and artwork can be damaged by vibration, shock, tilting, temperature changes or moisture, often without visible marks. A spectrometer knocked out of alignment or a server rack with a cracked board may not show a problem until it is switched on.
Good preparation reduces the risk and makes any claim clear. The checklist below covers the main steps.
It also reduces downtime. Equipment that arrives safely and is reinstalled quickly keeps a laboratory, surgery or server room running. Equipment that arrives damaged may take weeks to repair or replace, with lost work, rescheduled appointments and frustrated staff. A few hours of careful preparation is small compared with that risk, especially for instruments that are expensive, hard to replace or essential to daily operations.
Follow the manufacturer's instructions
Most precision equipment comes with transport instructions. These may include locking carriage arms, fitting transit screws, parking heads, draining fluids, removing consumables or disconnecting delicate parts. Some instruments must be prepared by the manufacturer's engineer, or warranties may be affected.
Contact the manufacturer or service provider early if you are unsure. They may need to attend before collection and after delivery.
- Read the manufacturer's transport and relocation instructions
- Fit transit locks and screws where supplied
- Remove or secure loose parts, trays and consumables
- Drain fluids where required
- Book engineer attendance if the warranty requires it
Packaging and crating
Original packaging is often the best option, because it was designed for the item. If it is not available, purpose-built crates or foam-lined cases can be made. Large instruments may travel on their own skids, strapped and wrapped, inside an air-ride vehicle.
Wrap equipment to protect it from dust and moisture, and add desiccant for longer journeys or temperature changes. Do not over-tighten straps on delicate casings.
| Item | Typical protection | Vehicle |
|---|---|---|
| Server racks | Wrapped, doors secured, strapped upright | Air-ride van or truck with tail lift |
| Lab instruments | Original packaging or foam-lined crate | Air-ride with two-person crew |
| Medical devices | Manufacturer packaging, transit locks | Air-ride, sometimes temperature-controlled |
| Artwork | Bespoke crate or soft-wrapped and framed | Air-ride, climate-controlled where needed |
Indicators and records
Shock and tilt indicators show if a package has been dropped or tipped beyond a set limit. Temperature and humidity loggers can record conditions inside a crate during transit. These give clear evidence if something goes wrong and encourage careful handling.
Photograph the equipment before packing and the packages before collection. Record serial numbers and the condition of each item. Keep the paperwork and photographs until the equipment is installed and tested.
Value and insurance
Standard carrier liability under conditions of carriage is usually limited by weight, which for light, valuable equipment can be a small fraction of its worth. Declare the full value when booking and arrange additional cover. For very high-value items, discuss security measures such as tracked vehicles, two-driver crews and direct routes with no unattended stops.
Secure dedicated vehicles start from £450, with extra insurance and security priced according to value and route.
Access at both ends
Delicate equipment is most at risk during handling. Check routes from loading bays or entrances to the final position: lifts, stairs, door widths, floor surfaces and ramps. Book goods lifts and loading bays in advance and tell the carrier about any security procedures or restricted times.
Air-ride vehicles with tail lifts, pallet trucks, stair climbers and skates may all be needed. A two-person crew is standard for technical moves, and heavier items may need a third person or powered handling equipment.
On delivery
Inspect packages and indicators before signing. Note any visible damage or triggered indicators on the delivery paperwork. Unpack and test as soon as practical, ideally with the manufacturer's engineer if needed, and report any problems to the carrier promptly within the time limits in their conditions.
Keep the packaging until testing is complete. If damage is found, the carrier and insurer may want to inspect it, and original packaging is often needed if the item must be returned for repair.
Planning timeline
Sensitive equipment moves need more lead time than ordinary freight. Allow time to contact the manufacturer, arrange packaging or crating, book engineers at both ends, confirm insurance and book loading bays and lifts. For laboratory or medical equipment, also allow for decommissioning and recommissioning, and any downtime that affects operations.
A simple timeline works well: two to three weeks before, confirm the plan, packaging and insurance; one week before, confirm access, engineer attendance and vehicle details; the day before, check equipment is prepared and packed. On the day, have someone at each end who knows the equipment and can make decisions.
For whole-laboratory or data centre moves, a site survey and a written method statement are worth the time. They identify risks early and give everyone a shared plan to follow.
- Two to three weeks before: plan, packaging and insurance
- One week before: access, engineers and vehicle
- Day before: equipment prepared and packed
- On the day: a decision-maker at each end
Questions people also ask
What is air-ride suspension in freight?
Air-ride suspension uses air bags instead of steel leaf springs, giving a smoother ride that reduces vibration and shock to the load. It is the standard choice for moving servers, laboratory instruments, medical devices, artwork and other sensitive equipment that could be damaged by vibration.
Should I use original packaging for equipment moves?
Yes, if it is available and in good condition. Original packaging is designed for the specific item, often with fitted foam and transit protection. If it is not available, a purpose-built crate or foam-lined case is the next best option for delicate equipment.
What are shock and tilt indicators?
Shock and tilt indicators are small labels or devices fixed to packages that change colour or trigger if the package is dropped, hit or tipped beyond a set limit. They provide evidence of rough handling and encourage carriers and handlers to take extra care.
Written and checked by the Specialist Freight team. Read our editorial policy.
More guides
How Much Does Specialist Freight Cost in the UK?
Specialist freight in the UK costs £150–£300 for a dedicated same-day van up to 100 miles, from £120 for an ADR dangerous goods pallet, £250–£500 for…
Sending Dangerous Goods by Road in the UK: ADR Explained
Dangerous goods sent by road in Great Britain must follow ADR, applied by the Carriage of Dangerous Goods and Use of Transportable Pressure Equipment…
Temperature-Controlled Freight in the UK: A Practical Guide
Temperature-controlled freight moves goods in refrigerated vehicles held at a set range, typically ambient controlled around 15–25°C, chilled around…
Dedicated Freight vs Pallet Network: Which Do You Need?
A pallet network is the cheapest way to send standard palletised goods on a next-day or two-day service through hubs. A dedicated vehicle goes direct…
Get a free specialist freight quote
Tell us what you need and we'll come back with a clear price.
Request a quote